Projects
Low Aromatics Diesel Hydrotreater Project
Chevron USA Richmond, CA.
Project type: Detailed design and engineering.
Project cost: $60M.
Project description:
- Modifications to a former vacuum gas oil desulfurizer to convert it into a 45M BPOD low aromatics diesel processing unit
- Relocation of a 270 ton reactor from Perth Amboy, NJ to Richmond, CA
Poly Rerun Column Replacement
Chevron USA Richmond, CA.
Project type: Detailed design and engineering.
Project cost: $13M.
Project description:
- Increased Tetramer production
- Retrofit new column, vessels, heat exchangers and other process equipment into existing facility
- Modification of off-plot piping systems, and new storage tank for new product marine off-loading
BNSF Pipeline Crossing
Tosco
Project type: Detailed mechanical and civil engineering design
Project description:
- Optimization of bridge crossing location and configuration
- Utilization of 3D laser scanning and modeling to obtain accurate site as-built conditions
- Development of detailed design construction and permitting packages
Wax Blending Facility
International Group Inc Richmond, CA.
Project type: Detailed design and engineering.
Project cost: $600M.
Project description:
- Conversion of existing pipelines and tanks to allow marine off-loading and truck tank car loading of hot wax
4 Crude Unit Projects
Chevron USA Richmond, CA
Project type: Crude Capacity Increase Project
Project cost: $5M
Project description:
- Detailed design and engineering
- Increased capacity of main crude oil processing unit over 20% from190MBPD to 240 MBPD
- 4-Crude EBV Installation Project
- Engineering, design and management
- Install air operated fail safe Emergency Block Valves to isolate fuel sources from pumps in the event of a fire
- 4-Crude Deluge Project
- Engineering, design and management
- Installed automatic deluge systems per NFPA-15 for numerous vessels and pumps
Bao Steel Corp. Waste Water Treatment Plant
McLaren Hart.
Project type: Detailed design and engineering
Project description:
- Developed overall equipment and piping layout
- Performed detailed civil, structural and piping engineering
Wilbridge Asphalt Upgrade
Chevron
Project type: Detailed design and engineering
Project cost: $5M
Project description:
- Modifications to an existing asphalt plant to enable the processing of an alternate crude feed
- Included naphtha desulfurization
- Detailed electrical, mechanical and civil engineering design
- New electrical substation design and specification
South Flare Tip Replacement
Exxon
Project type: Detailed design and engineering
Project cost: $500M
Project description:
- Replacement of refinery relief system flare tip and piping during major refinery turnaround
San Jose Terminal Upgrade
Chevron USA.
Project type:Detailed design and engineering
Project cost: $5M
Project description:
- Replaced loading islands and canopies
- Installed new, larger loading pumps
- Revamped tank field piping